Castrol Optileb GR UF 1 Food Grade Greases
Castrol Optileb™ GR UF Greases (Previously called Obeen™ UF ) are light, natural-colored special greases. They are physiologically safe and contain only components which are NSF H1 registered and comply with the U.S. Code of Federal Regulations, Title 21, Section 178.3570 and 178.3620 by the Food and Drug Administration (USA) as lubricants where incidental food contact may occur.The range of products under Optileb GR range are Kosher and Halal approved.
Description
Castrol Optileb™ GR UF Greases (Previously called Obeen™ UF ) are light, natural-colored special greases. They are physiologically safe and contain only components which are NSF H1 registered and comply with the U.S. Code of Federal Regulations, Title 21, Section 178.3570 and 178.3620 by the Food and Drug Administration (USA) as lubricants where incidental food contact may occur.The range of products under Optileb GR range are Kosher and Halal approved.Additional Information
| Size | 40 lb |
|---|---|
| Additional Information | Optileb GR 823 greases should not be mixed with greases using a different thickener. Lubrication intervals should be increased gradually to ensure complete removal of previous lubricant. At higher temperatures (above 100°C) relubrication intervals should be established by inspection. |
| Base Oil Viscosity at 100ºC (cSt) | 17.5 |
| Base Oil Viscosity at 40ºC (cSt) | 192 |
| Claims (Meets Requirements) | NSF H1, Halal, Kosher, Approved by LGA Bayern, FDA – 178.3570, 178.3620 |
| Copper Corrosion | 1 |
| Drop Point (ºF)] | 446 |
| Drop Point (ºC) | 230 |
| FE-9 Bearing Life Test - A/1500/6000-120 | Pass |
| Features and Benefits | H1 lubricants acceptable for use where incidental contact with food is possible., Very high melting point and non-drip characteristics of this grease minimize product contamination., Unique water resistance provides continuous protection even when equipment is washed down periodically., Physiologically safe (approved by LGA Bayern) – base fluid and all other ingredients used in GR 823 comply with sections 178.3570 and 178.3620 of the FDA guidelines. |
| Flash Point (ºF)] | > 392 |
| Flash Point (ºC) | > 200 |
| Four Ball Wear Scar Diameter (mm) | 0.6 |
| Freight Class | 50 |
| Low Temperature Flow Pressure, Maximum (mbar) | 550 |
| National Lubricating Grease Institute (NLGI) Consistency | #2 |
| Operating Temperature Range (ºF)] | -22 to 248 |
| Roll Stability - Shear Stability (5 hours, 70ºC / 158 ºF) % | < 10 |
| Rust Prevention: SKF Emcor Distilled Water | 0/0 |
| Thickener Type | Aluminum Complex |
| Water Resistance | 0 |
| Weight (oz) | 700 |
| Worked Penetration at 77ºF | 265 to 295 |