Shell Gadus S3 V460D 2 High Temperature Grease
Description
Shell Gadus S3 V460D 2 is a high performance, high temperature grease for slow moving heavily loaded large bearings subject ot shock loads. It is based on high viscosity index mineral oil and a lithium complex soap thickener. Apart from the containing the latest additives to ensure excellent high temperature anti-corrosion & anti-oxidation performance, they also contain solids to ensure the grease can handle shock loads.Additional Information
| Size | 330 gal, 40 lbs, 120 lbs, 10 x 14 oz, 400 lbs |
|---|---|
| Additional Information | Re-greasing Intervals – For bearings operating near their maximum recommended temperatures, re-greasing intervals should be reviewed., Extreme load carrying capacity, Excellent adhesion and water resistance, Excellent mechanical emulsion |
| Applications | Shell Gadus S3 V460D 2 is used for the grease lubrication of heavy duty, slow moving bearings subject to shock loads found in the following industries:, Mining, SteelShell Gadus S3 V460D 2 is listed by several leading OEMs:, Komatsu Mining (Germany), Terex, BE (certified), Dieffenbacher, Konecranes, CMI, Flat Products Equipment, Pfeiffer, Voith Paper Environmental, Meets the requirements of the 3% Moly grease Caterpillar specification, Rothe Erde, Shell Gadus S3 V460 1.5 is used for the grease lubrication of heavy-duty, slow moving bearings used in heavy industries:, Steel (continous castes, workroll bearings, etc.), Cement, Paper, Chemical Industry, Shell Gadus S5 T460 1.5 can be used for the grease lubrication of heavy-duty, slow moving bearings (both sealed & semi-sealed) used in machinery found in the following industries:, Steel, Wind Power, Shell Gadus S3 V1000A 2 is developed for lubrication of heavily loaded bearings operating at low speeds and under running conditions where they may be submitted to severe water spraying/flushing., Continuous casting machines, support, intermediate and work rolls in tandem, trim, roughing, universal and pilger mills., Shell Gadus S3 V1000A 2 is suitable for hot rolling as well as cold rolling., Heavily loaded slow running swivel bearings and sliding bearings., Shell Gadus S3 V1000A 1 is developed for lubrication of heavily loaded bearings operating at low speeds and under running conditions where they may be submitted to severe water spraying/flushing., Shell Gadus S3 V1000A 1 is suitable for continuous casting where the bearing temperature is below 140 C. |
| Base Oil Viscosity at 100ºC (cSt) | 31, 42 |
| Base Oil Viscosity at 40ºC (cSt) | 460, 950 |
| Color | Black, Light Brown |
| Drop Point (ºC) | 240, 250, 180, 170 |
| Features and Benefits | High Base Oil Viscosity to provide Excellent Load Carrying Performance – Meets the recommended base oil viscosity by leading OEMs.Excellent Mechanical Stability even under Vibrating Conditions – Consistency retained over long periods, even in conditions of severe vibration.Enhanced Extreme Pressure Properties & Resistant to Shock Loads – Excellent load-carrying performance enhanced by the presence of Moly.Excellent Water Resistance – Ensures lasting protection even in the presence of large amounts of water.Effective Corrosion Protection – Ensures components/bearings do not fail due to corrosion.High Dropping Point – Resistant to high temperatures., High Base Oil Viscosity to meet Leading OEM Requirements for Slow Moving Large Bearings – Proven in workroll bending operations in steel plants.Excellent Mechanical Stability even under Vibrating Conditions – Consistency retained over long periods, even in conditions of severe vibration.Enhanced Extreme-Pressure Properties – Excellent load-carrying performance.Excellent Water Resistance – Ensures lasting protection even in the presence of large amounts of water.Effective Corrosion Protection – Ensures components/bearings do not fail due to corrosion.High Dropping Point – Resistant to high temperatures., High Base Oil Viscosity to meeting Leading OEM Requirements for Slow Moving Large Bearings – Based upon the latest diurea grease technology proven in steel, paper, wind mills & other industries in Japan and around the world. Excellent Resistance to High Temperature & "Heat Soak" – Synthetic base stocks combined with the inherent oxidation resistance of the diura thickeners combine to give class leading performance in this area.Enhanced Extreme-Pressure Properties – Excellent load-carrying performance.Excellent Water Resistance – Ensures lasting protection even in the presence of large amounts of water. High Dropping Point – Resistant to high temperatures.Effective Corrosion Protection – Ensures components/bearings do not fail due to corrosion. |
| Four Ball Extreme Pressure (EP) Weld Point Load (kg) | 620, 612, 490 |
| Freight Class | 50 |
| Lubricating Ability SKF R2F A | Pass |
| Pumpability Long Distance | Good |
| Lubricating Ability SKF R2F B | Pass |
| Molybdenum Weight % | 3 |
| Maximum Water Washout Loss % | 5 |
| National Lubricating Grease Institute (NLGI) Consistency | #2, #1.5, #1 |
| Weight (oz) | 168 |
| Operating Temperature Range (ºF)] | -4 to 284, 5 to 266, -4 to 266 |
| Rust Prevention: SKF Emcor Distilled Water | Pass |
| Rust Prevention: SKF Emcor WWO Distilled Water | Pass |
| Thickener Type | Lithium Complex, Diurea, Lithium-Calcium |
| Weight (lb) | 400 |
| Worked Penetration at 77ºF | 265 to 295, 305, 295, 310 to 340 |