Shell Gadus S5 V220 2 Marine/Water Washout Grease
Description
Shell Gauds S5 V220 2 is an advanced performance grease for general transport and industrial applications. It is based on high viscosity index synthetic base oil and a lithium complex soap thickener. It contains additives against wear, oxidation, and corrosion.Additional Information
| Size | 120 lbs, 12 x 14 oz |
|---|---|
| Applications | Drydene Retraplex Diamond Blue™ is designed for use in the toughest on-road and off-road conditions where frequent and/or prolonged exposure to water, debris contamination or extreme conditions may occur:, Concrete and paving contractors that regularly operate equipment in wet conditions over a seasonal range of temperatures where frequent cleaning is required, Agriculture and forestry implements that come into frequent contact with crops, dirt, gravel, dust and the elements which can build up on operating surfaces especially booms and buckets, Sanitation and waste control vehicles that require frequent greasing due to loading, exposure from a wide range of seasonal elements and contamination from waste materials, Heavy-duty truck fleets utilizing standard and extended-range drain intervals where scheduled maintenance cycles may not always occur at the same location or operating conditions, Home builders and excavators with mixed fleets that move from location to location on a regular basis in varied operating conditions, both wet and dry Drydene Retraplex Diamond Blue is suitable for use in non sealed for life wheel bearings, chassis and general lubrication where superior performance from a single grease is desired. |
| Color | Blue |
| Copper Corrosion | 1A |
| Drop Point (ºF)] | 482 |
| Drop Point (ºC) | 250 |
| Features and Benefits | Drydene Retraplex Diamond Blue™ contains proprietary additive chemistry and resilient soap thickeners that greatly enhance its adhesive properties when exposed to water. The result is superior performance in applications where wet and humid conditions occur frequently:, Extremely low water sprayoff and water washout percentages mean Diamond Blue stays in place and lubricates exceptionally well even when exposed to or submerged in water, Very high load wear index and weld point which are key benchmarks for protecting greased surfaced from wear, scarring and deformation, Formulated to resist rusting and corrosion, even in the presence of water and other contaminants that can affect metal surfaces, Outstanding roll stability and very low water absorption helps Diamond Blue maintain its structure and consistency under loading and adverse conditions, Excellent tackiness and adhesion without sacrificing pumpability or mobility even in cold operating conditions Severe conditions can make typical greases vulnerable to thinning, softening, washout and reduced pumpability. Drydene Retraplex Diamond Blue is built to withstand the rigors of the elements and the harshest operating conditions. |
| Four Ball Load Wear Index (kgf) | 101 |
| Four Ball Wear Scar Diameter (mm) | 0.41 |
| Minimum Four Ball Extreme Pressure (EP) Weld Point (kg) | 620 |
| National Lubricating Grease Institute (NLGI) Consistency | #2 |
| Rust Prevention | Pass |
| Thickener Type | Lithium Complex |
| Timken OK Load (lb) | 50 |
| Viscosity at 40ºC (cSt) | 220 |
| Water Sprayoff Loss % | 9.0 |
| Water Washout at 79ºC | 1.8 |
| Weight (lb) | 35 |
| Weight (oz) | 140 |
| Worked Penetration at 77ºF | 288 |

