Castrol Syntilo 9902 Synthetic Coolant

Castrol Syntilo 9902 Synthetic Coolant

SKU: 152CDE Categories: , ,

Description

Castrol Syntilo 9902 is a synthetic fluid specially formulated for grinding and light-duty machining of ferrous metals. Syntilo 9902 settles chips quickly to provide free-cutting action, reduce cycle times and improve G-ratios. Syntilo 9902 provides corrosion protection and bioresistance.

Additional Information

Size

330 gal, 5 gal, 55 gal
Applications

Syntilo 9926 is developed for surface, cylindrical, double disk, internal and centreless grinding. This product is also recommended for milling, turning, boring, drilling and tapping on cast iron, low carbon and alloy steel. Suggested Applications Grinding Cast iron, low-medium alloyed steel, high-alloyed stainless steel Milling, Turning Cast iron, low-medium alloyed steel Drilling Cast iron Reaming, Tapping Cast iron Broaching Cast iron Possible Applications* Milling, Turning High-alloyed stainless steel Drilling Low-medium alloyed steel, high-alloyed stainless steel Reaming, Tapping Low-medium alloyed steel, high-alloyed stainless steel Broaching Low-medium alloyed steel, Syntilo 9930 is developed for surface, cylindrical, double disk and centreless grinding. This product is also recommended for milling, turning, boring and light drilling operation on cast iron and low carbon steel. Suggested Applications Grinding Cast iron, low-medium alloyed steel Milling, Turning Cast iron, low-medium alloyed steel Possible Applications* Grinding High-alloyed stainless steel Milling, Turning High-alloyed stainless steel Drilling Cast iron, low-medium alloyed steel Reaming, Tapping Cast iron
All Sawing %

4 to 10
BRIX Factor

2.1, 2.4, 2.3
Broaching %

10 to 15, 4 to 8
Concentrate Appearance

Light Yellow Liquid, Clear Blue Liquid
Dilution Appearance

Transparent, Transparent, Slightly Hazy
Centerless Inside Diameter (ID) and Outside Diameter (OD) Surface Grinding %

4 to 6
Drilling %

6 to 10, 6 to 8
Claims (Meets Requirements)

Boeing BAC 5578
Features and Benefits

Extended fluid life can help to reduce maintenance and downtime, Low foam in recommended water conditions (see details below), Rejects tramp oil to the surface of the fluid for easy removal, Settles chips quickly to prevent grinding wheel build-up and maintain a clean working environment, Formulated without Formaldehyde releasing agents and nitrite which help you to fulfill aspects of legislative requirements and waste treatment requirements where applicable, Contains Boron, EP-Ester additives, and amines, Nonstaining to aluminum alloys and formulated to pass major aerospace tests., Low foaming action improves housekeeping, filtration, and cooling characteristics even in soft waters or high agitation situations., Prevents in-process rust and helps protect machine tools from damaging corrosion without the use of nitrited additives., Maintains excellent rancidity protection and rust protection in hard water., Chemistry compatible for machining composite fiber material., Boeing approved BAC 5578, Formaldehyde releasing agent and nitrite free which help you to fulfil aspects of legislative requirements and waste treatment requirements where applicable, Contains boron, EP-Ester additives, and amines
Density (lb/gal)

8.45
Freight Class

50
General Machining %

4 to 10, 5 to 8
Grinding %

4 to 6
pH at 20:1 Ratio(pH)

9.0, 8.2 to 8.7, 9.2
Milling, Drilling, and Turning %

4 to 8
Reaming %

6 to 10, 4 to 8, 6 to 8
pH Concentrated (pH)

8.5 to 9.2
Specific Gravity at 60ºF (15.6ºC)

1.06 to 1.08, 1.065
Storage and Handling

To avoid product deterioration always keep the container/drum tightly sealed. Store the product in a cool, dry place away from direct sunlight. Prevent exposure to frost and avoid water ingress. For optimum product stability, it is preferable to store the product indoors between 5°C and 45 °C / 41°F and 113°F.
Water Range (ppm)

CaCO3: 0-400
Tapping %

4 to 10
Working Material

Ferrous Metals, Nonferrous Metals, Carbon Fiber Composites, Aerospace Alloys