Monroe AW Hydraulic Oil 32 Anti-Wear Hydraulic Oil
Description
Twin AW Hydraulic Oil 150 is a premium AW 150 lubricating oil that is engineered for modern hydraulic systems, providing resistance to pump wear, rust protection for ferrous metals, and reduction of thermal oxidation degradation; all required for high pressure, high-speed, close-tolerance pumps, machines and control circuits. It is ideal for use in most vane, axial, piston and gear-type pumps. Twin AW Hydraulic Oil 150 is formulated with high-quality base stock, select anti-wear and anti-foaming additives, as well as effective corrosion inhibitors, providing excellent performance in modern systems. It exhibits superior demulsibility characteristics, making separation from water readily achievable in most central system reservoirs and waste-recovery systems.Additional Information
| Size | 5 gal, 55 gal |
|---|---|
| Claims (Meets Requirements) | Eaton E-FDGN-TB002-E, 35VQ25A, ASTM D6158, Parker Denison – HF-0, HF-1, HF-2, Bosch Rexroth, DIN 51524, Part 1, 2, & 3, General Motors LS-2, JCMAS HK, Sperry Vickers/Eaton I-286-S, M-2950-S, US Steel 127, 136, Racine, ISO 11158 (HM fluids), DIN 51524 Part 2 HLP Type, Denison Hydraulics – HF-0, HF-1, HF-2, Eaton Vickers (Brochure 694), SS 15 54 34 M, Cincinnati P-69 (ISO 68) |
| Features and Benefits | DRYDENE RADIAS AW HYDRAULIC FLUIDS provide excellent performance across a wide range of applications and temperature ranges:, Premium anti-wear additives provide maximum protection to heavily-loaded surfaces helping to extend equipment life, Minimal viscosity change in both low and high temperature applications, Rapid water separation which helps minimize the effects of rust and corrosion., Fortified with anti-foaming agents to reduce air entrainment which also aids in water separation, Extended service life (5,000 hour TOST) reduces unit maintenance costs, Helps reduce sludge formation to promote better system cleanliness, Long Fluid Life – Maintenance Saving – Shell Tellus S3 M 68 offers an improved capacity to extend fluid maintenance intervals and hence reduce equipment downtime through:, An extended ASTM D943 TOST lifetime, with an oxidative stability that is designed for a minimum 5000 hours TOST life., Excellent resistance to breakdown in the presence of water and heat., These features provide extended maintenance capability without compromising protection or performance, even under severe or extended temperature range applications. Outstanding Wear Protection – Advanced zinc-free anti-wear additives provide protection over a wide range of conditions, including low and severe duty, and high load operations. This protection has been demonstrated in tough industry standard hydraulic pump tests such as Denison T6C and Eaton Vickers 35VQ25. Maintaining System Efficiency – Superior cleanliness and filterability; coupled with excellent water separation, air release and anti-foam characteristics,, all help to maintain or enhance hydraulic system efficiency. The filterability of Shell Tellus S3 M 68 is maintained even when the fluid is contaminated with water. Shell Tellus S3 M 68 has an ISO 4406 cleanliness of 21/19/16 or better excluding Shell filling lines. As recognixed by DIN 51524 specification, the oil is exposed to various influences with transport and storage that could affect the cleanliness level. |
| Flash Point (ºF)] | 455 |
| Freight Class | 50 |
| ISO Viscosity Grade | AW ISO 22, AW ISO 68 |
| Pour Point (ºC) | -45 |
| Note | Compatibility – Shell Tellus S3 M 68 is suitable for use with most hydraulic pumps. Fluid Compatibility – Shell Tellus S3 M 68 is compatible with most other mineral oil based hydraulic fluids. However, mineral oil hydraulic fludis should not be mixed with other fluid types (e.g. environmentally acceptable or fire resistant fluids). |
| Oxidation (hours) | 4000, 5000 |
| Rust Test | Pass |
| Pour Point (ºF) | -49, -27.4 |
| Viscosity at 100ºC (cSt) | 4.5, 8.9 |
| Viscosity Index | 111, 105 |