Shell EcoSafe S3 DU 68 Fire-Resistant Hydraulic Oil
Description
Shell EcoSafe S3 DU 68 is a synthetic fire-resistant hydraulic fluid, based on very high VI, polyalkylene glycol (PAG) base stocks, coupled with a proven ashless additive package. Shell EcoSafe S3 DU 68 has been designed to minimize fluid degradation and thus extend fluid changeout intervals under even hte most severe operating conditions. Shell EcoSafe S3 DU 68 provides the performance properties demanded by today's high-performance hydraulic systems. Shell EcoSafe S3 DU 68 is readily biodegradable.Additional Information
| Size | 55 gal |
|---|---|
| Acid Number (mg KOH/g) | 0.05 |
| Additional Information | Compatibility – Packing, Seals, and Hoses – The following materials are recommended for use with Shell Turbo S5 DR 46: Butyl rubbers, Nylon, PTFE, VITON rubber (depending on temperature range). Compatibility – Paints – Attention must be paid to painted surfaces. Cured epoxy paints are regarded as resistant to Shell Turbo S5 DR 46. |
| Air Release Valve at 50ºC (min) | 5.5 |
| Claims (Meets Requirements) | General Electric (GE), Mitsubishi Hitachi Power Systems (MHPS), Siemens, Factory Mutual (FM) Standard 6930 – Less Flammable Hydraulic Fluid, ISO 12922 HFDR-Type Fire Resistant Hydraulic Fluids, ASTM 4293 |
| Cleanliness (ISO 4406) | -/15/12 |
| Features and Benefits | Excellent Fire Resistance – Shell Turbo S5 DR 46 is a high-performance phosphate ester self-extinguishing fire-resistant fluid, offering high flash point and high auto ignition temperature. It minimizes the risk of fire, which could potentially be caused by mineral oil products. Good Oxidation Stability – To provide long service life under normal operating conditions. Good Hydrolytic Stability – Shell Turbo S5 DR 46 is to a great extent able to withstand rapid decomposition of the base fluid under the influence of moisture and water in the oil system. Good Demulsibiliy – To enable rapid separation from water for improved service intervals. Controlled Air Release – Good air-release minimizes air entrainment in lubrication and governor control systems in order to ensure safe operation of the whole equipment. Low Foaming – Minimal tendancy for foaming to provide proper lubrication and heat transfer. HSSE – Shell Turbo S5 DR 46 is an advanced low toxicity fire-resistant hydraulic fluid that is trixylenyl phosphate (TXP)-free and is designed specifically to comply with future EU REACH regulations for use in EHC systems. It is a fully formulated fluid based on tert-butylphenylphosphate. |
| Fire Point (ºC) | 354 |
| Flash Point (ºC) | 262 |
| Hot Manifold Ignition (ºC) | 726 |
| ISO Viscosity Grade | ISO 46 |
| Lubricant Composition | Polyol Ester |
| Pour Point (ºC) | -24 |
| Viscosity at 100ºC (cSt) | 5.4 |
| Water Weight % | 0.04 |