Castrol Molub-Alloy OG 8031/2200-00 Open Gear Lubricants
Description
Castrol Molub-Alloy™ OG 8031 Range (previously called Molub-Alloy™ 8031) is based on a high viscosity base oil gel formulated with a non-soap, inorganic thickening system. It contains a high viscosity base fluid especially designed to provide Extreme Pressure (EP) and Anti-Wear (AW) characteristics to the lubricant. A proprietary blend of Molub-AIIoy lubricating solids is included to promote anti-wear and load carrying properties. Molub-Alloy lubricating solids work synergistically with chemical reactive AW and EP additives to reduce contact temperatures and wear while providing excellent anti-weld protection under extreme pressure and shock loading.Additional Information
| Size | 400 lb |
|---|---|
| Additional Information | In order to minimise potential incompatibilities when converting to a new grease, all previous lubricant should be removed as much as possible prior to operation. During initial operation, relubrication intervals should be monitored closely to ensure all previous lubricant is purged. |
| Appearance | Dark and Opaque |
| Brookfield Viscosity at 25ºC, Spindle No. 7, 10 rpm (cP) | 48000 |
| Copper Corrosion | 1B |
| Features and Benefits | In order to minimise potential incompatibilities when converting to a new grease, all previous lubricant should be removed as much as possible prior to operation. During initial operation, relubrication intervals should be monitored closely to ensure all previous lubricant is purged. |
| Flash Point (ºF)] | 450 |
| Flash Point (ºC) | 232 |
| Four Ball Extreme Pressure (EP) Weld Point Load (kg) | 800 |
| Four Ball Load Wear Index (kgf) | 70 |
| Freight Class | 50 |
| FZG-Test Failure Load Stage | > 12 |
| Lubricant Composition | Mineral Oil |
| National Lubricating Grease Institute (NLGI) Consistency | #00 |
| Penetration at 10mm and 77ºF (25ºC) (Worked 60 Strokes) | 400 to 430 |
| Pumpability by Lincoln Ventmeter at -12 Degree Celsius (ºC) (psi) | 790 |
| Pumpability by Lincoln Ventmeter at -1ºC (psi) | 200 |
| Pumpability by Lincoln Ventmeter at -7ºC (psi) | 380 |
| Specific Gravity | 0.942 |
| Thickener Type | Inorganic |
| US Steel Timken Retention Test | Pass |
| Viscosity at 40ºC (cSt) | 6000 |
| Weight (lb) | 400 |