Drydene GearALL ELITE 80W-140 GL-5 Synthetic Heavy Duty Gear Oil
Twin Full Synthetic Gear Oils are Eaton approved full synthetic, premium quality, commercial drive-train lubricants designed to meet the rigorous demands of extended drain warrant requirements. These gear oils are fully tested and approved for the warranty requirements where an Eaton approved synthetic fluid is specified.
Description
Twin Full Synthetic Gear Oils are Eaton approved full synthetic, premium quality, commercial drive-train lubricants designed to meet the rigorous demands of extended drain warrant requirements. These gear oils are fully tested and approved for the warranty requirements where an Eaton approved synthetic fluid is specified.Additional Information
| Size | 275 gal, 55 gal, 5 gal |
|---|---|
| Applications | DRYDENE GEARALL LS 80W-90 GEAR OIL is designed for use in a variety of vehicle type equipped with conventional or limited-slip differentials which required an API GL-5/MT-1 gear lubricant: Passenger cars, light-duty trucks and sport utility vehicles, Commercial trucks, vans buses and agricultural equipment differentials and final drives hypoid or multipurpose gear oils are preferred, Initial fills, service fills and top-off fills of both conventional and limited-slip differentials specifying an API GL-5 fluid, Manual transmissions, bearings and gear reducers where API GL-5 fluids are specified, DRYDENE GEARALL ELITE GEAR OILS are designed as a multi-functional gear oil for use in a wide range of applications where extended performance from a synthetic fluid is desired: Gear boxes, Conventional differentials, Limited slip rear axles, Hypoid gears, Bevel gears, Manual transmissions It is recommended for use in the following equipment types: Modern passenger cars, SUVs and light trucks, On-highway medium and heavy-duty trucks, buses and vans, Off‐highway equipment fitted with hypoid or worm gears operating where high speed/shock load, high speed/low torque, and/or low speed/high torque conditions may occur, DRYDENE GEARALL® MP HEAVY-DUTY GL-5 GEAR OILS are designed for use in a wide range of applications where conventional GL-5 fluids are recommended: On-highway passenger vehicles, heavy-duty trucks and buses, agricultural and farming equipment, Recommended for hypoid and bevel gears found in many rear and front differentials, Suitable for use in manual transmissions where GL-5 fluids are specified, May be used for service fills, top-off and refills in hypoid and other drive axles specifying API GL-5 gear oil |
| Brookfield Viscosity at -40ºC (cP) | 100000, 94980, 60000 |
| Claims (Meets Requirements) | SAE J2360, Limited Slip, API GL-5, MT-1, MIL-PRF-2105E, Mack GO-J, MIL-L-2105D, Arvin Meritor – 0-76E (75W-90), 0-76B (80W-140), Chrysler MS-8985 (75W-140), Ford – M2C-192A (75W-140), WSL-M2C192-A (75W-140), GMW 16445 (75W-90), MAN 342 Type M2 (75W-90), MB 235.8 (75W-90), Voith Turbo – 132.00374401, 132.00374402 (75W-90), Volvo 97312 (75W-90), ZF – TE-ML 05B/16F/21B, TE-ML 07A/08, TE-ML 12B, TE-ML 16F, TE-ML 12M, API – GL-5, MT-1, SAE J-2360, Ford WSP-M2C197-A, Meritor Automotive 0-76-A, MAN 342 Type M1 |
| Copper Strip Corrosion | 1B, 1A |
| Features and Benefits | DRYDENE GEARALL LS 80W-90 GEAR OIL uses a specialized combination of extreme-pressure and friction-modifying agents to protect vital clutch and differential components from thermal degradation, wear and gear chatter. Resists oxidation, loss of viscosity and the effects of high operating temperatures which help minimize sludge and varnish formation, Special friction modifiers ensure correct slip rates and reduce gear chatter which helps improve operating efficiency and performance, Excellent protection against rust, corrosion and foam formation, Powerful EP additives equate to high load-carrying capacity improved wear protection, High viscosity index base oils keep finished fluid in grade and reduce shear-induced viscosity loss, DRYDENE GEARALL® ELITE GEAR OILS feature technologically advanced additive chemistry to provide extended performance under even the most severe operating conditions that often occur in today's modern gear systems: High viscosity index synthetic base oils ensure rapid oil flow and protection of gears during startup, especially in cold operating conditions, Provides excellent protection against wear produced by high torque loading common in modern gear units, Protects gear and bearing metals from scuffing and welding, Powerful rust and corrosion inhibitors safeguard metal-on-metal contact surfaces from deterioration, Robust antioxidants help extend fluid life, improve fuel economy and extend service intervals, Outstanding protection against low speed/high torque wear and scoring, Compatible with most modern seal materials to minimize leakage and reduce overall fluid usage, DRYDENE GEARALL® MP HEAVY-DUTY 85W-140 GL-5 OIL is blended to a unique formulation optimized to provide excellent service in all key performance areas: Superior torque and load handling capacity helps reduce wear, Helps prevent gear chatter and slippage to make shifts smooth and efficient which improves componenet life, Exceptional protection against thermal and oxidative degradation, Robust additives help prevent foaming, rust, corrosion and micro-pitting for extended gear life, Low foaming formula supports improved film strength and overall lubricity, Consistent performance in cold and hot operating environments |
| Flash Point (ºF)] | 414, 460 |
| Flash Point (ºC) | 212, 238 |
| Foam Test | Pass, TR/0 |
| Pour Point (ºC) | -26, -45, -15 |
| Pour Point (ºF)] | -15, -49, -5 |
| Rust Test | Pass |
| Viscosity at 100ºC (cSt) | 15.0, 25.1, 26.5 |
| Viscosity Index | 104, 198, 95 |