Shell Gadus S2 V30KC 1 Marine/Water Washout Grease
Description
Shell Gadus S2 V30KC 1 has been providing outstanding heavy duty water resistant protection in low temperatures for over 10 years. This semi-synthetic grease has been the benchmark for performance in this severe service area because of the unique combination of thickener, polymers and additives. Proven in extensive field tests and meets the requirements of the NLGI GC-LB automotive certification.Additional Information
| Size | 400 lbs |
|---|---|
| 100,000 Strokes Worked Penetration | 335 |
| 100,000 Strokes Worked Penetration w/ 10% Water Added | 360 |
| Applications | Shell Gadus S2 V30KXD 1 will provide excellent service for logging trucks and other heavy duty fleet vehicles, construction equipment, agriculture and forestry equipment, car washes and marine applications. It resists water and provides long lasting protection for pins, bushings, 5th wheels, chassis points, universal joints, and couplings. It is approved by the CFIA (Canadian Food Inspection Agency) for industrial food plant use. Avoid food contamination during application and storage. |
| Bomb Oxidation Pressure Drop at 100 hours (kPa) | 10 |
| Color | Gray |
| Corrosion Test, 48 hr Rating | Pass |
| Drop Point (ºC) | 175 |
| Features and Benefits | Exceptional Resistance to Water Washout – Allowing the grease to work under very wet conditions.Outstanding Mechanical Stability – To prevent grease breakdown, even in the presence of water.Corrosion Protection – To ensure your parts last longer. Excellent Adhesion (Tackiness) – Stays in place for longer re-lubrication intervals. |
| Four Ball Load Wear Index (kgf) | 63 |
| Four Ball Wear Scar Diameter (mm) | 0.4 |
| Maximum Oil Separation Loss % | 2.8 |
| Maximum Water Washout Loss % | 10 |
| Minimum Dispensing Temperature (ºC) | -35 |
| Mobility | 71 g/min |
| Molybdenum Weight % | 5 |
| National Lubricating Grease Institute (NLGI) Consistency | #1 |
| Operating Temperature Range (ºF)] | -40 to 176 |
| Thickener Type | Lithium-Calcium |
| Timken OK Load (lb) | 50 |
| Viscosity at 100ºC (cSt) | 5.4 |
| Viscosity at 40ºC (cSt) | 30 |
| Weight (lb) | 40 |
| Worked Penetration at 77ºF | 310 to 340 |