Trim VHP E200PW Soluble Oil Coolant
Description
TRIM VHP E200PW is an emulsion (soluble oil) coolant that specializes in heavy-duty machining and creepfeed grinding of aircraft alloys. Pratt & Whitney has approved this product for use on all materials and it applies to both Pratt & Whitney facilities and authorized subcontractors. The Pratt & Whitney approval number is PMC 9390.Additional Information
| Size | 5 gal, 55 gal, 275 gal |
|---|---|
| Additional Information | Run at lower concentrations for higher speed operations where heat removal is the key issue., Run at higher concentrations on soft, gummy materials and for lower speed operations where friction reduction and control of built-up edge are critical. |
| Applications | Creep-feed grinding, Form grinding, Grinding, Heavy-duty machining center work, High-pressure, High-volume, Machining, Reaming, Tapping |
| BRIX Factor | 0.9 |
| Claims (Meets Requirements) | Pratt & Whitney – PMC 9390 |
| Concentrate Appearance | Olive Green to Amber Liquid |
| Dilution Appearance | Milky White |
| Features and Benefits | Pratt & Whitney (PMC 9390) approved for use in all grinding and machining operations on all metals, No foam at very high pressures and volumes, Contains a proven and highly effective, nonchlorinated, extreme-pressure additive to control built-up edge and wheel loading, Very high levels of boundary lubrication for superior tapping, reaming, and form grinding results, Leaves a soft fluid film to prevent sticky ways, chucks, tool holders, and fixtures, Machines are easily washed off with coolant working solution to minimize the buildup of residues and chips, Easy recycling or disposal with conventional techniques and equipment, Runs effectively for long periods without the need for costly additives, Free of: chlorinated compounds and NPEs |
| Flash Point (ºF) | > 360 |
| Heavy Duty % | 7.5 |
| Industry Focus | Aerospace |
| Light Duty % | 5.0 to 5.5 |
| Moderate Duty % | 5.5 to 7.5 |
| Odor | Mild, Oily |
| pH at 20:1 Ratio(pH) | 8.2 to 8.9 |
| Volatile Organic Compounds (g/L) | 112 |
| Working Material | Aerospace Alloys |